|
Programming Interface Information:
The Monitor Records are intended Programming Interfaces that allow the customer to write programs to obtain services of z/VM. |
MRPRCTOP
PrologControl Block Contents
Cross Reference
MRPRCTOP Prolog
DSECT NAME - PRCTOP
FUNCTION - Map a Monitor record.
LOCATED BY -
Through the Monitor Control Area
REFERENCED CONTROL BLOCKS -
MRRECHDR Monitor Record Header
NAME - MRPRCTOP
DESCRIPTIVE NAME - Monitor Event Record
Domain 5 - Processor Domain
Record 14 - System Topology
DESCRIPTION - Provides System Topology counts and
STSI 15.1.x output.
NOTES -
1. The system topology monitor records are identical
and need to stay that way. The identical records
are MRPRCTOP (D5R14) and MRMTRTOP (D1R26).
2. For additional information about the format and meaning
of fields defined in this record (especially the
PRCTOP_STSI field), refer to the following books:
- Principles of Operation for the layout of the
variable length STSI 15.1.x output which is
documented in Chapter 10 under "STORE SYSTEM
INFORMATION". Anyone looking at the STSI data
in this record should read about the format of
the data and the CPU Topology Overview contained
there. (SA22-7832-08)
3. It is impossible to state every situation in which
a topology change occurs and this record is cut
because placement of the LPAR is determined by PR/SM.@U9010PQ
However, some likely causes include:
- Activating an LPAR on the CPC
- Deactivating an LPAR on the CPC
- VARYing OFF or VARYing ON logical CPUs in LPARs
- Changes in the available CPC hardware (such as
taking a node offline for service)
MRPRCTOP Control Block Contents
Offsets Dec Hex Type Len Name (Dim) Description 0 0 Structure 36 PRCTOP Start of monitor record 0 0 Character 0 PRCTOP_MRHDR Record header. See MRRECHDR for details. 0 0 Character 20 MRHDR 0 0 Unsigned 2 MRHDRLEN 2 2 Unsigned 2 MRHDRZER 4 4 Unsigned 1 MRHDRDM 5 5 Unsigned 1 * 6 6 Unsigned 2 MRHDRRC 8 8 Character 8 MRHDRTOD 16 10 Character 4 * 20 14 Character 0 MRHDR_END 20 14 Unsigned 2 PRCTOP_STSIOFF Offset to STSI 15.1.x output 22 16 Unsigned 2 PRCTOP_STSILEN Length of STSI 15.1.x output in this monitor record 24 18 Bitstring 1 PRCTOP_PCCMNEST Maximum MNest value from the RSCP Information response 25 19 Bitstring 1 PRCTOP_RCCMNEST The selector 2 (x) value used by CP on STSI 15.1.x to obtain CPU topology information. 26 1A Unsigned 2 * Reserved for IBM Use 28 1C Unsigned 4 PRCTOP_RCCTOPPL Cumulative number of times CP checked for system topology changes via PTF FC 2. 32 20 Unsigned 4 PRCTOP_RCCTOPCH Cumulative number of times CP updated the system topology because it changed (ie: the PTF FC 2 returned CC=1). 36 24 Character 0 PRCTOP_STSI STSI 15.1.x output. This section is variable length. PRCTOP_STSIOFF and PRCTOP_STSILEN should always be used to determine the byte offset of this field in the record and the byte length of this field.
MRPRCTOP Cross Reference
Hex Hex
Name Offset Length Value
MRHDR 0 20
MRHDR_END 14 0
MRHDRDM 4 1
MRHDRLEN 0 2
MRHDRRC 6 2
MRHDRTOD 8 8
MRHDRZER 2 2
PRCTOP 0 36
PRCTOP_MRHDR 0 0
PRCTOP_PCCMNEST 18 1
PRCTOP_RCCMNEST 19 1
PRCTOP_RCCTOPCH 20 4
PRCTOP_RCCTOPPL 1C 4
PRCTOP_STSI 24 0
PRCTOP_STSILEN 16 2
PRCTOP_STSIOFF 14 2
This information is based on z/VM V7R1.0.
Last updated on 11 Sept 2018 at 19:56:15.
Copyright IBM Corporation, 1990, 2018