|
|
 |
z/VM Virtual Networking Link Aggregation - Create port group
The SET PORT group command is used to define the OSA-Express
ports (devices)
from the z/VM side
that will make up the link aggregation group.
A port group will be associated with a VSWITCH using the
DEFINE or SET VSWITCH command.
SET PORT GROUP CISCO1 JOIN 9C00 9D00
Note that the entire OSA-Express2 port
is required to be exclusively
used for the port group member (although CP will only
use the triplets starting at 9C00 and 9D00 for this example).
The port group
defaults are taken for LACP mode (LACP Active) and
the load balancing interval (300 seconds).
This document is maintained by:
Sue Farrell
z/VM Development
farrells@us.ibm.com
|
|
|
