TCP/IP Level 440 RSU 0404 Preventive Service Planning
(PSP) Bucket
**> Last update: 02 Dec 2004
**> Synch'd w/RETAIN: 21 Jun 2005
***********************
* SUBSET 0404RSU *
***********************
This subset contains service recommendation information for z/VM
Version 4, Release 4 Modification 0 specific to the installation of
the RSU tape. Service recommendations for all product components
are listed in this subset. Be sure to refer to the RSU subset that
matches the service level of the RSU tape that is to be installed.
PTF service listed in this subset should be applied after service from
the RSU tape has been loaded.
After the date that this subset is no longer supported, it is
recommended that the latest RSU and corresponding subset be use when
applying new levels of service.
If you are a SoftwareXcel customer and choose not to use the latest
RSU, you can search on HIPER and the applicable component identifiers
(ie COMPONENT ID and RELEASE) to determine the recommended service
that should be ordered.
Subset Status : Nov. 23, 2004 12:00:00 EST
Product ID : 5739A03
Product Name : z/VM Release 4.4.0
Service Level : 0404
Level Created : Nov. 23, 2004 12:00:00 EST Subset Created
************************************************************************
* C H A N G E S U M M A R Y *
************************************************************************
Date Last
Changed Section
1. 2004/12/02 Installation Information
2. yyyy/mm/dd Documentation Changes No Entries
3. yyyy/mm/dd General Information No Entries
4. yyyy/mm/dd Service Recommendations No Entries
5. yyyy/mm/dd Cross Product Dependencies No Entries
************************************************************************
* SECTION 1. I N S T A L L A T I O N I N F O R M A T I O N
************************************************************************
1. 2004/12/02 Beginning with the 0404 RSU, TCP/IP RSU service includes
updates to the following sample files:
FTPEXIT SEXEC
FTPEXIT SAMPASM
Because these files have been updated through service,
messages DTCPRD3036W and DTCPRD3043I will be reported for
each of these files when they are placed into production
by the TCP2PROD utility. These messages serve to raise
awareness that the content of these sample files differs
from their production-use counterparts (FTPEXIT EXEC and
FTPEXIT ASSEMBLE) -- and, that such changes may affect the
use of these files in a production environment.
Messages DTCPRD3045I and DTCPRD3046I will also be
reported, which cite basic file attributes of the
pertinent sample and production-use files.
If a production file listed by message DTCPRD3046I is -NOT
USED- for your installation, you can manually replace that
file with its serviced sample counterpart to prevent
future occurrences of these messages, when files are again
processed after the installation of TCP/IP service. File
replacement in this instance should be done using the
VMSES/E VMFCOPY command illustrated here:
VMFCOPY samp_file_ID prod_file_ID (OLDDATE REPLACE
PRODID 4TCPIP40%TCPIP SPRODID 4TCPIP40%TCPIP
If a production file listed by message DTCPRD3046I -IS
USED- by your installation, do not replace that file.
Instead, review the content of the (serviced) sample
counterpart (cited by messages DTCPRD3045I) and adapt your
production file based on any changes present, as
warranted. Once this has been done, message DTCPRD3036W
(and its associated messages) then can be ignored.
************************************************************************
* SECTION 2. D O C U M E N T A T I O N C H A N G E S *
************************************************************************
This section not used in this subset.
************************************************************************
* SECTION 3. G E N E R A L I N F O R M A T I O N *
************************************************************************
This section not used in this subset.
************************************************************************
* SECTION 4. S E R V I C E R E C O M M E N D A T I O N S *
************************************************************************
* *
* IMPORTANT NOTE : These PTFs should be applied after applying the RSU *
* *
************************************************************************
PTF in Solving
Date Error APAR PTF Comp Abstract
========== ======= ======= ======= ==== ============================
1. yyyy/mm/dd UQnnnnn PQnnnnn UQnnnnn nnnn No Entries
************************************************************************
* SECTION 5. C R O S S P R O D U C T D E P E N D E N C I E S *
************************************************************************
This section contains information that is dependent upon another
product other than this subset ID.
This section not used in this subset.
------------------------------------------------------------------------
PTF Include List:
This item contains no records.
------------------------------------------------------------------------
PTF Exclude List:
This item contains no records.
------------------------------------------------------------------------
PE APAR List:
This item contains no records.
------------------------------------------------------------------------
Pending PE APAR List:
This item contains no records.