VM/Pass-Through Facility
PVM
PVM
Running the PVM and CVIEW servers on CMS 12+
Both the PVM and CVIEW servers require a 370 mode virtual machine. 370 mode is no longer supported on VM/ESA V2 with CMS 12 or higher. Both servers will run on an ESA mode virtual machine using CP's 370 accomodation support. To turn this on, add the following line in the profile exec for each server:
'CP SET 370ACCOM ON'
In addition, the virtual storage size must not exceed 16M for the CVIEW server. Various errors may occur when the virtual storage size is greater than 16M. For instance, the following error messages may be issued as CVIEW initialization fails:
DXG750I Error return from 'WAIT', 'HNDINIT', or 'INSTANT' DXGMAI253E Error occurred in DXGVMCF: 97
DMSHDE744R Unexpected external interrupt detected
A hardware microcode patch is require if the following error occurs on the PVM server:
DMSHDE744R Unexpected external interrupt detected, interrupt status consists of CODE=1004, CPUID=0000, PARAMETER=00000000. Enter a 1 for ABEND or 2 for RESUME:
The following is a list of patches that are required to support the VM/ESA 370 Accommodation Mode feature for the PVM server. These patches require a Power-on-Reset (POR) to install.
Machine | SEC | Patch # |
3090 Model 'S' | SEC 227570 |
CPHH0161 CPHI0135 |
3090 Model 'J' | SEC 227578 | CPHH0162 |
9021 340 Based Processors | SEC 229914 |
CPHI0137 CPHF0042 CPHH0163 |
9121 320 Based Processors |
SEC C35674 SEC C35682 SEC C35686 |
CPHI0136 |
9121 511 Based Processors |
SEC C35945 SEC C35954 |
CPHI0134 CPHI0133 |
The following lists model families which comprise the processors in the above table:
Machine | Model # |
9021 340 Based Processors | 330, 340, 500, 580, 620, 720 |
9121 320 Based Processors | 180, 190, 210, 260, 320, 440, 480, 490, 570, 610 |
9121 511 Based Processors | 311, 411, 511, 521, 621, 622, 732, 742 |