|
Programming Interface Information:
The Monitor Records are intended Programming Interfaces that allow the customer to write programs to obtain services of z/VM. |
MRSYTCUM
PrologControl Block Contents
Storage Layout
Cross Reference
MRSYTCUM Prolog
DSECT NAME - SYTCUM
FUNCTION - Map a Monitor record.
LOCATED BY -
Through the Monitor Control Area
REFERENCED CONTROL BLOCKS -
MRRECHDR Monitor Record Header
NAME - MRSYTCUM
DESCRIPTIVE NAME - Monitor Sample Record
Domain 0 - System Domain
Record 17 - Physical CPU Utilization Data for LPAR Management
DESCRIPTION - Physical CPU utilization data for LPAR management,
including data for each CPU.
NOTES:
-- This record is generated only when the system is running
in the logical partition ("LPAR") environment and the
LPAR management time facility is available on the system.
-- SYTCUM_CALMIBOF and SYTCUM_CALMIBLN should always be used
to locate the SYTCUM_MIBDATA entries. Their values may be
subject to change.
MRSYTCUM Control Block Contents
Offsets
Dec Hex Type Len Name (Dim) Description
0 0 Structure 36 SYTCUM Start of monitor record
0 0 Character 0 SYTCUM_MRHDR Record header. See MRRECHDR for
details.
0 0 Character 20 MRHDR
0 0 Unsigned 2 MRHDRLEN record length in bytes
2 2 Unsigned 2 MRHDRZER field of zeros
4 4 Unsigned 1 MRHDRDM domain identifier
5 5 Unsigned 1 *
6 6 Unsigned 2 MRHDRRC record identifier
8 8 Character 8 MRHDRTOD Time at which this record was
built. In time-of-day (TOD) clock
format. See IBM System 370 XA
Principle of Operation for
explanation of format.
16 10 Character 4 *
20 14 Character 0 MRHDR_END End of header
20 14 Unsigned 1 SYTCUM_LCUPCPCT Number of physical CPUs. This
also is the number of
SYTCUM_MIBDATA entries in the
record.
21 15 Character 3 * Reserved for IBM use
24 18 Signed 2 SYTCUM_CALMIBOF Byte offset, relative to the
start of this record, to the first
SYTCUM_MIBDATA entry of the table
26 1A Signed 2 SYTCUM_CALMIBLN Length, in bytes, of a
SYTCUM_MIBDATA entry
28 1C Character 8 SYTCUM_LCUTCTOD Time-of-day, in TOD clock value,
that the physical CPU information
was fetched
36 24 Character 0 * Table of SYTCUM_MIBDATA entries,
one for each physical CPU.
SYTCUM_CALMIBOF, SYTCUM_CALMIBLN
and SYTCUM_LCUPCPCT should be used
to locate this table.
CPU Utilization data for LPAR management. There is
a separate entry for each CPU.
Offsets
Dec Hex Type Len Name (Dim) Description
0 0 Structure 10 SYTCUM_MIBDATA Physical CPU data entry
0 0 Unsigned 2 SYTCUM_LCUMCPU Physical CPU address
2 2 Character 8 SYTCUM_LCUMGTM Accumulated number of
microseconds during which a
physical processor was assigned
LPAR management time. This value
is reset only when LPAR is
initialized.
MRSYTCUM Cross Reference
Hex Hex
Name Offset Length Value
MRHDR 0 20
MRHDR_END 14 0
MRHDRDM 4 1
MRHDRLEN 0 2
MRHDRRC 6 2
MRHDRTOD 8 8
MRHDRZER 2 2
SYTCUM 0 36
SYTCUM_CALMIBLN 1A 2
SYTCUM_CALMIBOF 18 2
SYTCUM_LCUMCPU 0 2
SYTCUM_LCUMGTM 2 8
SYTCUM_LCUPCPCT 14 1
SYTCUM_LCUTCTOD 1C 8
SYTCUM_MIBDATA 0 10
SYTCUM_MRHDR 0 0
This information is
based on z/VM V4R2.0.
Last updated on 15 Oct 2001 at 08:04:23.
Copyright IBM Corporation, 1990, 2001